I noticed several times that history data can gap to the past.
And it causes my indicator to behave unpredictable.
Time gap to the past
-
- Posts: 3
- Joined: Thu Dec 22, 2016 1:27 am
Time gap to the past
- Attachments
-
- Time gap to past.jpg (34.91 KiB) Viewed 25321 times
-
- Posts: 13
- Joined: Thu Jan 19, 2017 8:26 am
Re: Time gap to the past
Hello,
Thank you for the question. Please try the following:
1.Restore your project through the File > Open project option.
2.In case the issue persists, clear the project history and download the data again:
a. Go to File > Data Center and press the “Clear history” button (or the “Clear” button if you have FT2).
b. Download the data again using the “Update from server” button.
c. Open your project via File > Open project.
Run the test, it should be fine.
Thank you for the question. Please try the following:
1.Restore your project through the File > Open project option.
2.In case the issue persists, clear the project history and download the data again:
a. Go to File > Data Center and press the “Clear history” button (or the “Clear” button if you have FT2).
b. Download the data again using the “Update from server” button.
c. Open your project via File > Open project.
Run the test, it should be fine.
Who is online
Users browsing this forum: No registered users and 11 guests