Hi, I deselected a couple of panels using the view tab, however |I cant get them back as they were originally at the bottom of the screen. Can someone tell me how to restore these to the original default settings?
Thanks
Panels in FT3
-
- Posts: 1479
- Joined: Mon Apr 01, 2013 3:55 am
Re: Panels in FT3
Hello,
Thank you for the screenshot.
You need to add the panel via the View -> Show Panels menu.
Then you need to move the appeared window to the bottom of the program until you see the blue rectangle on the bottom panel.
Then release the mouse button and the window will be attached to the panel.
Does it help?
Thank you for the screenshot.
You need to add the panel via the View -> Show Panels menu.
Then you need to move the appeared window to the bottom of the program until you see the blue rectangle on the bottom panel.
Then release the mouse button and the window will be attached to the panel.
Does it help?
-
- Posts: 4
- Joined: Sun Oct 09, 2016 2:37 pm
Re: Panels in FT3
Hi, thanks for getting back to me. I added back the panels as you have suggested but they are not in the same pane as they were when I opened the program - they are on different levels as shown on the screenshot. Is there anyway I can restart the program so it is laid out as it was originally (I will not touch the panel view again!
I don't mind reinstalling if the key will work again.
I don't mind reinstalling if the key will work again.
-
- Posts: 1479
- Joined: Mon Apr 01, 2013 3:55 am
Re: Panels in FT3
Hello,
Please load the Sample project (demo project) via the File -> Open Project menu, this should fix the issue.
Then create a new project in the program (via "New Project" button) and continue using the program.
If you deleted this project from the list and don't have another projects please download the program from our site and install it into another folder.
Then copy the “data”, "Templates" folders from your old Forex Tester 3 folder and paste them with replacement into the new one.
After that, register it with your key and continue using it.
Please load the Sample project (demo project) via the File -> Open Project menu, this should fix the issue.
Then create a new project in the program (via "New Project" button) and continue using the program.
If you deleted this project from the list and don't have another projects please download the program from our site and install it into another folder.
Then copy the “data”, "Templates" folders from your old Forex Tester 3 folder and paste them with replacement into the new one.
After that, register it with your key and continue using it.
-
- Posts: 4
- Joined: Sun Oct 09, 2016 2:37 pm
Re: Panels in FT3
Great - that worked using the second method - thanks
Return to “General Questions about FT”
Who is online
Users browsing this forum: JamesSainc and 4 guests