This appear as a split window with the stat's pane on the left and 3 black boxes on the right. After running the optimizer using the play button, the display shows exactly the same ... nothing!
Using the search function in the help file, there appears to be no references to 'optimizer' in it.
Strategy Optimizer
-
- Posts: 24
- Joined: Sat Jan 20, 2007 8:17 pm
Strategy Optimizer
- Attachments
-
- ScreenShot013.jpg (62.83 KiB) Viewed 16312 times
- Terranin
- Site Admin
- Posts: 833
- Joined: Sat Oct 21, 2006 4:39 pm
Re: Strategy Optimizer
Trillion wrote:This appear as a split window with the stat's pane on the left and 3 black boxes on the right. After running the optimizer using the play button, the display shows exactly the same ... nothing!
Using the search function in the help file, there appears to be no references to 'optimizer' in it.
Yes but you need at least 2 point to have diagrams, so you should choose parameter you want to optimize - start value, end value and step, and after start it will test strategy (end value - start value)/step times, and paint diagrams. If you just press test without setting this values you will have only 1 point and no diagrams.
See image:
- Attachments
-
- scr4.gif (26.1 KiB) Viewed 16298 times
Last edited by Terranin on Wed Jan 24, 2007 2:03 pm, edited 1 time in total.
Hasta la vista
Mike
Mike
-
- Posts: 24
- Joined: Sat Jan 20, 2007 8:17 pm
-
- Posts: 24
- Joined: Sat Jan 20, 2007 8:17 pm
OK - I now see a line chart being drawn up in optimiser. Can you explain what it is that you have done in the picture you've shown? I see that you have added an additional MA value and also note that you added a 1 to the 'Step' box. What is step and what exactly is going on with the optimiser? Is it that the optimiser is 'stepping' through MA values 10 to 20? Is that right?
- Terranin
- Site Admin
- Posts: 833
- Joined: Sat Oct 21, 2006 4:39 pm
Who is online
Users browsing this forum: No registered users and 17 guests