Visible Range Volume Profile Indicator: Definition, How to Read, Use & Backtest

VRVP (Visible Range Volume Profile) indicator is one of the fastest ways to see where the market actually traded, not just where price went. Instead of candles alone, you get a volume histogram by price for the candles that are currently visible on your chart. That’s why the is kind of a “map” of interest. 

In this guide we explain the definition of VRVP in plain terms, and how reading Volume Profile Visible Range works in real trading. We’ll cover the key levels you’ll use every day: Point of Control (POC), Value Area (VAH / VAL), High Volume Nodes (HVN), and Low Volume Nodes (LVN). Then we’ll show how to use the in simple strategies and practice it in Forex Tester Online without risking money. You’ll also see what traders mean by best settings and when you should adjust them.

This is a complex topic for many traders, as there are many similar indicators and subtleties associated with each. But we can handle it. Let’s start.

VRVP vs. VPVR: Clearing the Confusion

VRVP and VPVR usually mean the same thing in practice. Traders say VRVP (Visible Range Volume Profile) or VPVR (Volume Profile Visible Range) when they talk about a volume profile that is calculated only on the candles you can currently see on screen.

On TradingView, FTO, and many other platforms, the official name is “Visible Range Volume Profile”. You pick a left and right boundary (your visible range), and the tool builds the profile only for that range. If you scroll, zoom, or change the visible area, the profile updates. That “visible” part is the whole point.

So don’t overthink the naming:

• VRVP = common shorthand traders use.
• VPVR = another common label you’ll see in platforms and communities.
• Visible Range Volume Profile = TradingView’s name for the same idea.

You can also read about The Volume Indicator if you want to learn more.

What matters is how you read it: where the Point of Control (POC) sits, how price behaves inside the Value Area (VAH / VAL), and where HVN and LVN zones form.

This may take time to understand and remember. Please make sure you can tell the difference before you go on.

Core Components Explained (The Vocabulary)

To start reading VRVP, you need five terms. Once you know them, the histogram starts looking much clearer. Now we have some more terms to remember. Here they are.

The Point of Control (POC)

The Point of Control (POC) is the single price level with the most traded volume inside your current visible range. Think of it as the market’s “most accepted” price. Price often returns to it, reacts to it, or stalls around it.

The Value Area (VAH/VAL)

The Value Area (VAH / VAL) is the zone where most volume often happens, usually 70% by default.

• VAH (Value Area High) is the top edge of that zone.
• VAL (Value Area Low) is the bottom edge.
  Inside VA, price often behaves more “normal” and two-sided. At VAH/VAL, you often get decisions: accept back inside, or break out and run.

High Volume Nodes (HVN)

High Volume Nodes (HVN) are the “fat hills” on the profile. They mark prices where the market spent time and traded a lot. These zones often act like support/resistance because many positions were opened there. If the price comes back, it meets interest again.

Low Volume Nodes (LVN)

Low Volume Nodes (LVN) are the “thin gaps” in the profile. They show prices the market rushed through. That’s why LVNs often act like fast lanes: if price enters an LVN, it can move quickly until it hits the next HVN or the Value Area edge.

Quick way to read it

• POC = “fair value” magnet.
• VAH/VAL = decision edges.
• HVN = sticky zones (bounce or stall).
• LVN = thin zones (fast move).

How to Set Up VRVP on TradingView & Best Settings

There is no single “magic” setup, but these are solid starting points.

Default indicators settings (FTO)

Best VRVP Settings

Row Size (Rows Layout / Number of Rows)
This controls how detailed the histogram is.

• Day trading: often 150-250 rows for finer detail.
• Swing trading: fewer rows can be fine since moves are larger. Too low means the profile looks blocky. Too high means too much noise.

Value Area Volume: keep it at 70%.

This is the market standard and what most traders use when reading Volume Profile Visible Range.

Volume Type (Total / Up-Down / Delta)

• Total volume is the cleanest for beginners.
• Up/Down or Delta can add context later, but they are not required to trade well.

Always be aware of what range you are showing. If you zoom into only two days, your POC, HVN, and LVN describe those two days, not the whole month. Many mistakes come from reading VRVP levels without realizing the visible range changed. Always try to decide your range first (session, week, swing leg), then read the profile.

How to add VRVP on TradingView

1) Open your chart on TradingView. Click Indicators.

2) Search for Visible Range Volume Profile.

3) Select it and it appears on the right side of your chart.

That’s it. The VRVP indicator now calculates volume for only what you see on screen. If you zoom or scroll, it recalculates. This is normal. It’s why it’s called visible range.

How to Practice VRVP Without Risk: Forex Tester Online

This indicator is visual. You don’t master it by reading. You master it by watching how the profile forms as price moves. That takes screen time. Doing it live costs money. Doing it in a simulator costs nothing.

This is where our Forex testing software fits. Forex Tester Online (FTO) lets you replay the market and read Visible Range Volume Profile candle by candle. You see how the POC, HVN, and LVN appear and shift as new volume comes in.

Unlike static charts, you are not guessing what the profile looked like in the past. You watch it build in real time. FTO is built for backtesting and practice. For volume profile work, it gives you three big advantages:

✅ Replay years of data fast
✅ Scroll forward bar by bar and read market like it’s live
✅ Test reactions at POC, VAH, VAL, HVN, and LVN safely
✅ Add spreads, slippage, and commissions for realism
✅ Get advanced trade stats like win rate, drawdown, and expectancy, along with personalized trading psychology advice
✅ Tag trades and review what worked
✅ Use Blind Testing mode, Scenarios, Prop Challenge simulator, and many other advanced tools that help you to learn and practice

Follow our guide below to  learn How to use VRVP.

1) Get access

Open Forex Tester Online main page, create an account, and sign in.

2) Create a project

Click “New Project”.
Choose a symbol (for example EURUSD, USDJPY, or NASDAQ).

Select a long date range so you see different market conditions.

3) Add VRVP to your chart

Open Indicators and add VRVP (and any other indicators you need).
Set it to a visible range that matches your trading idea (session, swing, or trend leg).

4) Define simple rules

Keep it clear. For example:

• Long if price rejects VAL or LVN and returns inside value
• Short if price rejects VAH
• Your target is the next HVN or POC
• Place stop beyond the rejection level

Write rules before testing.

5) Replay and trade

Press Play. Move bar by bar. Watch how the Point of Control (POC) shifts. Place trades when your rules trigger. Do not rush. The goal for now is pattern recognition.

6) Review analytics

Open Analytics after a batch of trades. Check win rate, average R, and drawdown. See which levels (POC, HVN, LVN) gave cleaner reactions.

Also check our new Exit Optimizer menu. It helps you to find perfect trade exits to get more profit from each successful trade.

7) Refine slowly

Change one thing at a time. Test on another period or another pair. Keep what holds up. Drop what doesn’t.

If you want to read the indicator well, you need repetition. If you want repetition without risk, you need a simulator. Forex Tester Online gives you that training ground before you put money on the line.

How to Read and Trade with VRVP

The VRVP indicator is not a signal generator. It is a map of where trading activity happened. When you learn reading Volume Profile Visible Range, you start to see where price is accepted and where it moves fast.

Below are simple, real ways traders use it in Forex, stocks, and futures.

Strategy 1: Trading the POC Rejection / Magnet

The Point of Control (POC) is the price with the highest traded volume in the visible range. It often acts like a “fair value” zone.

Price behavior around POC is very repeatable. When price is far from POC, it often drifts back to it. When price reaches POC, it often reacts.

Two common plays:

POC as a magnet

If price is above value and volume is fading, traders expect a move back to POC. The idea is mean reversion toward fair value.

POC rejection

If price hits POC and quickly rejects with strong candles, traders trade the bounce away from it.

Simple rule many use:

1. Enter after a clear reaction at POC, not on the first touch.
2. Stop goes beyond the rejection.
3. Target is the next HVN or the opposite side of value.

POC works because it shows where both buyers and sellers agreed on price.

Strategy 2: The LVN “Gap” Play

Low Volume Nodes (LVN) are areas with very little traded volume. On the histogram, they look like valleys.

LVNs often act like “air pockets.” Price moves quickly through them because there was little past interest there.

Typical idea:
If price enters an LVN with momentum, traders expect it to travel fast to the next high-volume area.

Example logic:

1. Price breaks away from an HVN and enters an LVN.
2. Instead of fading the move, traders go with it.
3. Target is the next HVN or value edge.

LVNs are not strong support or resistance. They are more like fast lanes.

Strategy 3: Support & Resistance using HVNs

High Volume Nodes (HVN) are peaks in the volume profile. They show where a lot of business was done.

These zones often behave like support and resistance. Not because of lines on a chart, but because many positions were built there.

Common read:

• If price returns to an HVN from above, it may act as support.
• If price returns from below, it may act as resistance.

Traders watch how price behaves when it re-enters an HVN. Slow movement and small candles often mean acceptance. Sharp rejection often leads to a move away.

HVNs are useful because they show real interest, not just visual levels.

Strategy 4: Breakouts vs. Mean Reversion (VAH & VAL)

The Value Area (VAH/VAL) marks where about 70% of volume happened.

This area is often treated as “fair value.”
Outside it is considered expensive or cheap.

Two main plays exist:

Mean reversion

If price moves outside VAH or VAL and quickly returns inside, traders often trade back toward POC. The logic is return to fair value.

Breakout

If price leaves value with strong candles and volume, traders look for continuation. The idea is price finding a new value area.

A common filter:
Weak move outside value – fade it
Strong move and hold outside value – go with it

VAH and VAL are widely used in futures and institutional trading.

Validating a VRVP Setup

The idea is only worth trading when it repeats on real history. First, mark your levels on the live chart: the Point of Control (POC), Value Area (VAH/VAL), and the nearest HVN and LVN. Then write one clear trigger (reject, accept, or break) and one clear target (next node or value edge). No “we’ll see”.

Next, open Forex Tester Online (FTO) and replay similar market conditions. Use the same Visible Range Volume Profile logic on past sessions: same timeframe, same session, same volatility. Take 30-50 examples of the same setup. Track win rate, average R, and how often price reaches the next node before hitting your stop. If results only work in one small slice, the setup is not stable.

Comparison: VRVP on TradingView vs. Forex Tester Online

The indicator itself follows the same logic on any platform. It plots volume by price inside the visible range. The real difference is how you use it.

TradingView is strong for live analysis. You scroll, zoom, and read the Visible Range Volume Profile on current charts. It’s good for marking Point of Control (POC), Value Area, HVN, and LVN in real time.

TradingView

In case you don’t like TradingView, but still want to use a tool like this, check our list of TradingView alternatives.

Forex Tester Online (FTO) is for practice and proof. You can replay the market candle by candle and watch how VRVP would build over time. You see how POC shifts, how price reacts to HVN or LVN, and whether your idea actually worked.

FTO

Serious traders use both. One to read the market, the other to test their decisions.

Pro Tips for Advanced Users

• Zoom with purpose. VRVP changes with your visible range. Zoom out for macro levels, zoom in for intraday levels. Compare both.
• Track POC migration. A moving Point of Control shows where value shifts. Trend days often drag POC in one direction.
• Stack confluence. Combine with VWAP, trendlines, or Fibonacci. One signal is weak. Two or three aligned levels matter more.
• Note LVN speed. Price often moves fast through Low Volume Nodes. Plan targets through these “thin” zones.
• Replay in FTO. Mark levels, then replay and see if reactions repeat. Screen time builds pattern memory.

Conclusion

Visible Range Volume Profile shows where real trading activity happened. It helps you see fair value, strong support and resistance, and fast zones where price moves quickly. VRVP works best with context and practice. Before risking money, replay past markets in Forex Tester Online and watch how POC, HVN, and LVN behave over time. This is how volume turns into a real trading skill.

Disclaimer

Trading involves risk. The indicators in this article are for educational purposes only and are not financial advice. Past performance does not guarantee future results. Always test strategies before using real money.

FAQ

Why does my VRVP keep changing when I scroll the chart?

It recalculates based only on what you see on the screen. When you zoom or scroll, the Visible Range Volume Profile uses a new set of candles. That changes the volume distribution and can move the Point of Control (POC).

If you want stable study, replay price step-by-step in Forex Tester Online (FTO). You can watch how it builds over time instead of seeing it jump as you scroll.

What are the best VRVP settings for day trading?

There is no single perfect preset, but many intraday traders use a larger Row Size (around 150-200) so the indicator shows clearer volume clusters. Keep Value Area at 70%, since that’s the common definition of fair value. Then adjust based on your market and timeframe.

How do I find “hidden” support and resistance with VRVP?

Focus on High Volume Nodes (HVN). These thick areas on the profile show prices where a lot of trading happened. Price often reacts there. Low Volume Nodes (LVN) are the opposite. They mark thin zones where price usually moves fast because little volume sits there. HVN acts like walls, LVN acts like tunnels.